No wiring, no app, no electrician. It snaps onto the ceiling with a magnet in about ten minutes, then you run it from the pillow.
Where people are putting theirs
You're finally comfortable. Blanket's right. Phone's down. And the light is still on, across the room.
So you lie there deciding whether it's worth getting up. Or you leave it on and sleep badly. Or you keep a lamp by the bed, a lamp by the chair, and a phone flashlight for everything else.
The problem was never the light. It's that the switch is on the wall by the door, and you're not.
Here's why people are swapping the wall switch for a remote they keep on the nightstand.
You know that moment: you're warm, you're horizontal, and the light is on. Now it's one click from the nightstand. Lights off, you stay put.
Same in the morning. Switch it on before your feet touch the floor, so you're not stumbling to a switch in the dark.
Ten brightness levels, all the way down to a 5% glow. Bright while you're getting ready, softer while you read, barely-there while you scroll and drift off.
Your partner falls asleep first? Drop it to the lowest setting. Enough to find your way, not enough to wake them.
Candle-warm (2700K). Movie night, wind-down, the last hour before sleep.
Soft warm. Reading in bed without the glare.
Neutral. Everyday light that just looks normal.
Cool white. Folding laundry, finding the right socks.
Daylight (6500K). Makeup, getting dressed, telling black from navy.
Flip it to motion mode with the remote and you don't even need the button. Walk in after dark and it fades on. Walk out and it fades off after 15 seconds to 2 minutes, whatever you set.
A darkness sensor keeps it off in daylight, so it isn't lighting an empty room at noon.
The reading corner with no lamp socket. The closet that never had a light. The bedroom where the switch only turns on an outlet. If it has a ceiling, it can have a light.
Renting? Nothing to drill and nothing to wire, so there's nothing to ask the landlord about.
Peel the backing off a thin steel plate, press it to the ceiling, snap the light on. A magnet holds it there. The remote works straight out of the box. No pairing, no app, no Wi-Fi password.
Adding a wired ceiling light where there's no wiring can cost $250 to $600. This costs less, and you can take it with you when you move.
Lift it off the magnet, charge it, pop it back up. Here are the two honest numbers:
Up to 60 days per charge in motion mode, where it's only on when someone's there.
About 10 hours per charge if you leave it switched on constantly from the remote.
So it's built for evenings, bedtime and the rooms you pop in and out of. It won't replace your main living-room light, and we'd rather tell you that now.
Peel the backing off the steel plate and press it to a clean spot on the ceiling for 30 seconds.
Give the adhesive a few hours to set, then snap the light onto the plate. The magnet holds it.
Pick your color and brightness on the remote. Put the remote on your nightstand. Done.
Swipe to compare โ
No. It comes with its own remote that works straight out of the box. Nothing to download, nothing to pair with your router.
Up to 60 days in motion mode. If you keep it switched on constantly from the remote, about 10 hours. Most people use the remote in the evening and motion mode the rest of the time.
It's made for bedrooms, closets, hallways, reading corners and small bathrooms. For a big living room, plan on more than one, or keep your main light for full brightness.
The light holds on by magnet to a rigid steel plate. Clean the spot, press the plate firmly for 30 seconds and leave it a few hours before snapping the light on. For textured ceilings, use the two screw holes.
Yes. Lift the light off, peel the plate slowly at a low angle, and put it back up in the next place.
Try it for 30 nights. If it's not for you, send it back. And if a light stops working in its first year, we'll replace it. No return needed.
One for the bedroom, or one for every room you're tired of walking across.